| PART |
Description |
Maker |
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| ADM8320 ADM8316 ADM8318 ADM8319 ADM8322 |
Supervisory Circuit with Watchdog, Manual Reset, and Active-Low Open-Drain Reset Output
Supervisory Circuit with Watchdog, Manual Reset, and Active-Low Push-Pull Reset Output
Supervisory Circuit with Watchdog, Active-Low and Active-High Push-Pull Reset Outputs
Supervisory Circuit with Manual Reset, Active-Low and Active-High Push-Pull Reset Outputs
Supervisory Circuit with Manual Reset, Active-Low Open-Drain and Active-High Push-Pull Reset Outputs
|
Analog Devices
|
| ADM1818-10AKS-REEL ADM1818-20AKS-REEL ADM1818-10AK |
Microprocessor Supervisory in SOT-23 with Manual Push Button Option
Microprocessor Supervisory in SOT-23 with Open Drain Output Choices
Microprocessor Supervisory in SOT-23 with Active High Push-Pull Output
|
Analog Devices
|
| ADM809-5SAKS-REEL ADM809-5SAKS-REEL7 ADM809-5LAKS- |
Microprocessor Supervisory Circuit in 3-Lead SOT-23 & SC70, Active-Low Push-Pull Output
Microprocessor Supervisory Circuit in 3-Lead SOT-23 & SC70, Active-High Push-Pull Output
Microprocessor Supervisory Circuit in 3-Lead SC70, Active-Low Open-Drain Output
Microprocessor Supervisory Circuits in 3-Lead SC70 and SOT-23 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
BNC JACK 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
Microprocessor Supervisory Circuit in 3-Pin SOT-23 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
JT 18C 18#20 PIN PLUG 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
|
Analog Devices, Inc.
Glenair, Inc.
|
| L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER
PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| HV9808PJ HV9808X HV9708 HV9708PJ HV9708X HV9808 |
32-Channel Serial To Parallel Converter With High Voltage Push-Pull Outputs
|
Supertex Inc
SUTEX[Supertex, Inc]
Supertex Inc
|
| CGA-7718Z |
PUSH-PULL 50MHz to 1000MHz HIGH LINEARITY InGaP HBT AMPLIFIER
|
RF Micro Devices
|
| HMC754S8GE10 |
GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz
|
Hittite Microwave Corporation
Hittite Microwave Corporati...
|
| HV3418 HV3418DG HV3418PG HV3418X |
64-Channel Serial To Parallel Converter With High Voltage Push-Pull Outputs
|
Supertex Inc
Supertex, Inc
|
| BGY787 |
750 MHz 21.5 dB gain push-pull
750 MHz, 21.5 dB gain push-pull
CATV amplifier module
|
http://
NXP Semiconductors
PHILIPS[Philips Semiconductors]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
|
